CAD / CAM
ContactBuy Cadivari
Course 02

3D modelling

Create solids with Push/Pull, Revolve and Loft, refine them with Chamfer, Shell and Fillet, then prepare a model for 3D printing.

Start this course
7 lessonsAbout 35 min
Create solids with Push/Pull, Revolve and Loft, refine them with Chamfer, Shell and Fillet, then prepare a model for 3D printing.
Create solids with Push/Pull, Revolve and Loft, refine them with Chamfer, Shell and Fillet, then prepare a model for 3D printing.

Inside this course

  1. 01

    Turn a sketch into a solid

    Use Push/Pull to create a body and then adjust a planar face.

    5 min
  2. 02

    Revolve a profile around an axis

    Turn one closed sketch face around a straight line to make a rotational solid.

    6 min
  3. 03

    Loft between two profiles

    Place closed sections on separate planes and connect them into an editable body.

    7 min
  4. 04

    Bevel an edge with Chamfer

    Replace a sharp edge with a flat bevel and control its exact distance.

    4 min
  5. 05

    Hollow a body with Shell

    Remove one face and leave an editable wall and floor thickness.

    5 min
  6. 06

    Round a solid edge

    Select a solid edge and control its round with an exact radius.

    4 min
  7. 07

    Prepare a model for 3D printing

    Export a solid model and understand what the slicer does next.

    4 min

Every lesson is available without an account.