CAD / CAM
ContactBuy Cadivari
Course 03

CAM workflows

Order pockets and contours, compare entry methods, engrave filled artwork and compare model roughing with surface finishing.

Start this course
4 lessonsAbout 29 min
Order pockets and contours, compare entry methods, engrave filled artwork and compare model roughing with surface finishing.
Order pockets and contours, compare entry methods, engrave filled artwork and compare model roughing with surface finishing.

Inside this course

  1. 01

    Pocket before the outside cut

    Turn nested profiles into ordered machining operations and inspect the result.

    7 min
  2. 02

    Compare and configure entry

    Watch plunge, linear ramp, helical ramp, bore milling and peck drilling, then configure entry in Cadivari.

    8 min
  3. 03

    V-carve filled artwork

    Turn a compound SVG into variable-depth engraving while preserving its inner opening.

    7 min
  4. 04

    Rough a model and finish its surface

    Understand how two cutters turn layered stock removal into a finished surface.

    7 min

Every lesson is available without an account.